Buy from the best, or settle for the rest!
Build a radical custom chopper for as little as $7000. Our Morph frame kits are designed to accept all the major parts from a Buell sport bike. A good running donor Buell can be purchase for as little as $2500. Combined with the Morph frame kit, you will have all the major parts needed to build a sweet custom chopper. Our pro-street Morph frames are designed to be super low, but still have enough ground clearance to clear speed bumps and ride the curves. They also have unique design features that will set you apart from the crowd…
Built to order in the USA by ABCW
[additional photos]
RigidMorph Frame Kit
Fat 1.25” DOM structural tubing throughout. Super fat 1.75” tubing in backbone. Standard 3/8” plate steel down rails, or optional curved 1.75” down tube. Fat School 2.5” neck post with built in fork stop.
Standard frame kit includes:
Fwd and top motor mounts,
Rear eng mount,
Battery tray,
Axle covers, axle and retainers
Neck bearings and internal fork stop
35 to 42 deg rake options
Standard frame accepts Buell rear wheel (up to 200 tire with chain conversion or 180 with belt).
Optional parts:
Choose round or oval axle blocks - 0.00
Curved 1.75” round down tube - 0.00
Built in fender/seat support - 300.00
Seat pan - 150
Covered seat - 300
Chain conversion kit - 400 (with .875 offset)
250 offset sprocket or pulley - 225.00
Offset drive support kit (recommended with offset Sprocket or pulley) - $395.00
Oil tank - 300
Gas tank mounting - 100
Gas tanks - from 200.00 up
Starting
at $2199.00
Call or email
for more info
RolledMorph
[additional photos]
RolledMorph Frame Kit
Super curved drop seat frame with integral oil tank. Nicknamed the “Rolled Morph”, it has dual curved 1.25” backbone rails, mated to the neck with 1.75” curved tubing. Single curved 1.75” down tube and single lower frame rail . Accepts Buell swingarm and shock. Rubber mounted engine design. Kit comes with integral oil tank, forward engine mount, engine torsion rod mounts, neck bearings and internal fork stop. Standard 38 degree rake.
Optional parts: battery tray, rear seat support, gas tank, 250 swingarm.
at $2799.00
Call or email
for more info
[additional photos]
CrossBreed Frame Kit
Super radical drop seat frame with "DownRails". It has dual flat plate down rails and 1.75” straight or curved backbone. 1.25" seat rails and lower frame rails, and AllenBros Morph swingarm plates. Accepts Buell swingarm and shock. Rubber mounted engine design.
Standard frame kit includes:
Forward engine mount,
Engine torsion rod mounts,
Neck bearings and internal fork stop,
Standard 38 degree rake.
Optional parts (also see rigid Morph above):
Battery tray,
Oil tank,
Rear seat support or fender struts - $300 up
200 or 250 swingarms - Starting at $1199
Or send us your Buell, and we'll build the bike.
Starting
at $2499.00
Call or email
for more info
Hand fabricated exclusively by Allen Bros. Chopper Works
MADE IN THE USA
Our raw bars are completely fabricated and ready to finish the way you like.
Paint or powdercoat them to match your bike, or have them chromed by your favorite plating shop.
Standard features include:
8" rise, 34" width and 10" pullback.
1 1/4" FAT BAR tubing with .120" wall thickness.
Standard 3 1/2" mounting for custom choppers and Harleys.
ABCW special design reverse, drilled mounting.
Vibration isolators also included with each set.
Internal throttle and clutch installation available.
+++Specify rake of your bike when ordering+++
Chrome plating or powdercoating available for additional fees.
Custom rise and pullback available upon request (additional fees may apply).
You dream it, we'll build it! Contact us for a custom quote!
BeltHooks
BeltHook Radical Bars (Raw) - $299.00
These are the bars that made us famous.The same bars are installed on the the WarLord radical custom, which took Best of Show at the largest motorcycle show in Colorado, 2005.
Swept forward design to keep the wrists straight make for a comfortable hand position.
ABCW special reverse drilled mounts and vibration isolators included.
Loops Radical Bars (Raw) - $299.00
Same double bend, swept forward design as the BeltHooks, but with a looped cross-bar instead of the hook.
ABCW special reverse drilled mounts and vibration isolators included.
RoadRage Radical Bars (Raw) - $279.00
Our latest creation. radical curved hook, but with single bends in the bars. This allows for a wide variety of pullback, rise and width.
ABCW special reverse drilled mounts and vibration isolators included.
Radical DragBars (Raw) - $199.00
T-bar design with swept back center.
ABCW special reverse drilled mounts and vibration isolators included.
Reverse Drilled Mounts - $29.95
Special design weld in mounts for custom built handlebars.
For builders to weld into 1 1/4" tube bars with 1" I.D.
They are drilled 3/8" through the center for running wires and cables, and accept standard vibration isolators (with cup washers drilled to 11/16"). Takes 5/8" fine nut below tripple tree for installation of bars
Comes in stock length or 3" stretch.
DOM tubing construction, tig welded.
Hidden axle blocks amd chrome moly axle.
Custom made by Allen Bros. Chopper Works, in the USA.
Made to order, allow 2 to 3 weeks for delivery.
Call or email
for more info
For 300 tire with 11" -13" stretch.
Shimmable jackshaft for easy chain alignment.
Includes swingarm, two Tsubachi Pro-Gold drive chains, jackshaft assy, and billet aluminum axle adjusters.
Call or email
for more info
ALL PRICES AND OPTIONS SUBJECT TO CHANGE
We have many used Buell takeoff parts, call or email, to many to list...
other smokin' deals on new and used parts!
sales@allenbros.com or call 719-271-6868
Top
Contact for questions or comment:
TROY at Allen Bros Chopper Works
DOUG at Allen Bros. Chopper Works